Idegis Tecno is the self-cleaning salt electrolysis system for private and residential pools up to 160 m³.
Competitive price.
Integrated pH control.
With this salt chlorinator you will be able to disinfect the pool water without the need to handle or store dangerous chemical products.
Specially designed to be installed in technical rooms due to its small size.
Easy installation.
High / low salt level alarms.
Transparent cell with parallel input and output.
Easy installation and use.
Tech grade electrodes (8,000-10,000 hours)
Salt level alarm system (high/low).
Integrated pH control. Includes probe and calibration solutions.
Dosing pump NOT INCLUDED in the price(See dosing pumps).
IDEGIS TECNO PH Models
DT-7 PH - 7 GR.CL/H + PH (up to 25 m³)
DT-12PH - 12 GR.CL/H + PH (up to 50 m³)
DT-21 PH - 21 GR.CL/H + PH (up to 80 m³)
DT-30 PH - 30 GR.CL/H + PH (up to 120 m³)
DT-40 PH - 40 GR.CL/H + PH (up to 160 m³)
TECHNICAL SPECIFICATIONS
Comparative table between the different models of the salt chlorinator Idegis Tecno PH. Each and every one of its features and specifications.
| DT-7PH | DT-12PH | DT-21PH | DT-30PH | DT-40PH | |
| Chlorine production | 6-7 g/h | 10-12 g/h | 17-21 g/h | 24-30 g/h | 31-40 g/h |
| Water volume | 25 m³ | 50 m³ | 80 m³ | 120 m³ | 160 m³ |
| (volume calculated for 8 h of daily filtration in a hot climate) | |||||
| Power supply | |||||
| Operating voltage | 230 V ac 50/60 Hz | ||||
| Consumption | 0.5 A | 0.9 A | 1.0 A | 1.5 A | 1.9 A |
| Fuse (5x20mm) | 1AT | 2AT | 2AT | 3AT | 4AT |
| Output (Adc) | 3.5 A x 2 | 6 A x 2 | 3.5 A x 6 | 6 A x 5 | 6.5 A x 6 |
| m³ swimming pool (16-24º C) | 40 | 60 | 100 | 160 | 200 |
| m³ pool (+25º C) | 25 | 50 | 80 | 120 | 160 |
| Salinity | 3-12 g/l (4-6 g/l recommended) | ||||
| Ambient temperature | max. 40º C | ||||
| Enclosure | ABS | ||||
| Polarity inversion | 2h, 3h (jumper) and test mode (panel selection) | ||||
| Production control | 0-100% (5 production levels) | ||||
| Flow detector (gas) | Yes (always active) | ||||
| Flow detector (gas) | No | ||||
| Production control by blanket | One level (10%), activated by voltage-free contact | ||||
| External production control | Two levels (0,set%), activated by voltage free contact | ||||
| Diagnostic. Electrodes | No | ||||
| Salinity test (qualitative) | No | ||||
| Salt alarm indicator | One common led for high/low salinity | ||||
| System conf. menu | No | ||||
| Modbus & PoolStation (compatible) | No | ||||
| Electrolysis cell | |||||
| Electrodes (self-cleaning activated titanium) | Tech grade (8,000-10,000 hours) | ||||
| Minimum flow rate (m³/h) | 1 | 2 | 3 | 5 | 6 |
| No. of electrodes | 3 | 5 | 7 | 11 | 13 |
| Material | Methacrylate derivative | ||||
| Pipe connection | PVC glued Ø 63 mm | ||||
| Max. pressure | 1 kg/cm² | ||||
| Working temperature | 15-40ºC max | ||||
| PH controller | |||||
| Measuring range | 0.0-9.9 (pH) | ||||
| Control range | 7.0-7.8 (pH) | ||||
| Accuracy | ± 0.1 (pH) | ||||
| Calibration | Automatic by means of standard solutions (included) | ||||
| Control outputs (pH) | One output 230V / 500 mA ac max (dosing pump connection) | ||||
| PH sensor | Epoxy body 12x150mm, 0-80ºC, single junction. Range 0-12 (pH) | ||||
VIDEO
ADDITIONAL INFORMATION
Brochure IDEGIS TECNO PH (information, technical characteristics, ...).
Instruction manual IDEGIS TECNO PH (information, technical characteristics, ...).
